Permanent Magnetic Lifter YX2 Series

Permanent Magnetic Lifter 1.shifting magnetic circuit type 2. ratchet wheel/down bar type 3.full automatically at work

Permanent Magnetic Lifter YX2 Series

Applicable:

 YX2 series permanent-magnet lifter can be widely used in machinery, metallurgy, mine, dock and other situation which need to transport steel plate. The lifter’s attraction produced by the permanent-magnet and needn’t power supply and electric controlled equipment. It uses the crane’s pull transmitted to the discharged carrier rod by the ratchet wheel structure and cam structure on the lifter’s discharge device and separates the permanent-magnetic chuck from the attracted magnetic materials to achieve the automatic cycle discharging materials. It can only use single unit to lift the short and thick magnetic materials, It is an ideal lifter, but it has requirement to the attracted materials’ outline dimension and weight (see main technical parameters table).

Product‘s characteristics:

 YX2 series adopts the structure of ratchet wheel type/carrier rod type, achieves the feeding and discharging action automatically. It is used for short and thick steel plates.It has equipped with air-gap adjusting rod which can adjust the attraction to lift and transport steel plate with single one conveniently.It has requirement to attracted materials’ outline dimension and weight (see main technical parameters table).

The Main Technical Data of YX2

Model	Lifting capacity(KG)	Min.Holding Material Contour	Overall dimension (mm)					Mass(KG)
			A	a	B	H	h
YX2-0.2	200	440 × 185	440	350	185	525	112	50
YX2-0.5	500	560 × 275	560	470	275	645	112	80
YX2-1	1000	720 × 355	720	540	355	760	165	140
YX2-2	2000	870 × 436	870	690	436	905	165	235
YX2-3	3000	1100 × 436	1100	950	436	1090	180	410
YX2-5	5000	1270 × 565	1270	1010	565	1130	220	640
YX2-10	10000	1270 × 1100	1270	1010	110	1480	350	1450

Note:

1. When the lifter is lifting the thin steel plate, it may need person to lever the steel plate to achieve the action of discharging materials(see the operation instruction)

2. When lifter is on operation, should check and assure that the permanent-magnet lifter’s working face is clear and has n’t attracted foreign matters to make sure the operation is safe.

3. It has equipped with air-gap adjusting rod which can adjust the attraction conveniently.

YX-2 Series Permanent magnetic lifter adopts the ratchet wheel/crown bar type and can automatically finish the whole operation of lifting and releasing.It is especially designed to handle short and thick steel plates.

1.Full automatically at work

2.Adopts ratche wheel/down bar type 

3.Shifting magnetic circuit typePermanent Magnetic Lifter

Permanent Magnetic Lifter YX2 Series